Husqvarna 967 271901-01 Operator's Manual

26LUBRICATIONGeneralRemove the ignition key to prevent unintentionalmovements during lubrication.When lubricating with an oil can, it must be filledwith engine oil.When lubricating with grease, unless otherwisestated, use a high grade molybdenum disulphidegrease.For daily use, the machine must be lubricatedtwice weekly.Clean away unwanted grease after lubrication.It is important to avoid getting lubricant on thebelts or the drive surfaces of the belt pulleys.If this happens, try to clean them with spirits. Ifthe belt continues to slip after cleaning, the beltmust be replaced. Gasoline or other petroleumproducts must not be used to clean belts.IMPORTANT INFORMATION Use minimallubrication and remove excess lubricant so thatis does not come into contact with belts or beltpulley drive surfaces.12/12 Every year1/52 Every Week1/365 Every dayLubricate with grease gunFilter changeOil changeLevel checkWARNING! Escaping hydraulic oil underpressure can have sufficient force to penetratethe skin, causing dangerous injury. If injuredby escaping fluid, see a doctor immediately.Dangerous infection or reaction can develop ifproper medical treatment is not administered.