Husqvarna 143AE15 Operator's Manual

Also see for 143AE15: Operator's manual

Contents

STARTING AND STOPPINGEnglish – 13throttle button. The throttle function is now activated. Toreturn the engine to idle, press the throttle trigger again.Warm engineUse the same starting procedure as for a cold engine butwithout setting the choke control in the choke position.StartingHold the machine upright with your left hand. Grip thestarter handle, slowly pull out the cord with your right handuntil you feel some resistance (the starter pawls grip),now quickly and powerfully pull the cord.Push the choke control back to its original position assoon as the engine fires, and continue trying to start untilthe engine starts.CAUTION! Do not pull the starter cord all the way out anddo not let go of the starter handle when the cord is fullyextended. This can damage the machine.StoppingThe engine is switched off by moving the stop switch tothe stop position.! WARNING! When the engine is startedwith the choke in either the choke orstart throttle positions the cuttingattachment will start to rotateimmediately.