2. Push the start/stop button until the green LED goesout.3. Push the release buttons on the battery and removethe battery from the product. (Fig. 48)MaintenanceIntroductionWARNING: Read and understand the safetychapter before you do maintenance on theproduct.Maintenance scheduleWARNING: Remove the battery before youdo maintenance.The following is a list of the maintenance steps that youmust do on the product. SeeMaintenance on page 14for more information.Maintenance Daily Weekly MonthlyClean the external parts of the product with a dry cloth. Do not use water. XExamine that the start and stop button works correctly and is not damaged. XMake sure that the power trigger and the power trigger lockout function correctlyfrom a safety point of view. XMake sure that all controls work and are not damaged. XKeep the handles dry, clean and free from oil and grease. XMake sure that the cutting attachment is not damaged. Replace the cutting at-tachment if it is damaged. XMake sure that the cutting attachment guard is not damaged. Replace the cut-ting attachment guard if it is damaged. XMake sure that the screws and nuts are tight. XMake sure that the battery release buttons on the battery works and locks thebattery in the product. XExamine that the battery charger is not damaged and function correctly. XMake sure that the battery is not damaged. XMake sure that the battery is charged. XMake sure that the battery charger is not damaged. XExamine all cables, couplings and connections. Make sure they are not dam-aged and free from dirt. XDo a check of the connections between the battery and the product. Do a checkof the connection between the battery and the battery charger. XTo examine the battery and the batterycharger1. Examine the battery for damages, for examplecracks.2. Examine the battery charger for damages, forexample cracks.3. Make sure that the connection cord of the batterycharger is not damaged and that there are no cracksin it.To clean the product, the battery andthe battery charger1. Clean the product with a dry cloth after use.14 782 - 005 - 14.10.2020