Honeywell VISTA-128BPT User Manual

Also see for VISTA-128BPT: User guide Overview Programming guide Installation and setup guide Installation and setup guide

Contents

Honeywell VISTA-128BPT User Manual Manual pdf 73 page image

67Section 37: Quick Guide to System Functions• • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • •Function Procedure CommentsCheck Zones Press [∗]. To view faulted zones when is system not readyDisplay AllDescriptorsPress and hold [∗] for 5 seconds. Displays all alpha descriptors programmed byinstaller.Arm System 1. Enter code.2. Press arming key desired (AWAY,STAY, INSTANT, MAXIMUM).Arms system in mode selected.NOTE: After pressing the STAY orINSTANT arming key, enter 1, 2 or3 to arm in the desired STAY orINSTANT mode.Disarm System Enter code. Press OFF [1]. Disarms system and silences alarms.Bypass Zones 1. Enter code. Press BYPASS [6].2. Enter zone numbers to bebypassed (use 3-digit entries).Bypassed zones are unprotected and will notcause an alarm if violated.Quick Bypass 1. Enter code. Press BYPASS [6].2. Press [#].Bypasses all faulted zones automatically.Group Bypass 1. Enter code. Press BYPASS [6].2. Press [∗]. Enter Group Number(01-15)Bypasses all zones assigned to the group.Chime Mode Enter code. Press CHIME [9]. Keypad will sound if doors or windows areviolated while system disarmed.Test Mode Enter code. Press TEST [5] Activates alarm sounder and allows sensors tobe tested.View Messages Press and hold [0] for at least 5seconds.Message from central station will appear.View UserCapabilitiesEnter user's code. Press [∗] + [∗]. Displays partitions & authority levels assignedto the user.GOTO Partition 1. Enter security code. Press [∗].2. Enter partition number (1-8).3. 0 returns to default partition.Allows a user at one keypad to performfunctions in another partition, if that user isauthorized to do so.Self-Help Press and hold any function key for atleast 5 seconds.Will display abbreviated instructions for thekey pressed.Add a User 1. Enter master/manager code.2. Press CODE [8].3. Enter new user's user number.4. Enter code for that user.5. Enter authority for that user in thispartition (1-5).6. Follow prompts, 1=Yes, 0=No.Master & Manager level users can add users tothe system, each with its own code andauthority level.