Honeywell VISTA-128BPT User Manual

Also see for VISTA-128BPT: User guide Overview Programming guide Installation and setup guide Installation and setup guide

Contents

Honeywell VISTA-128BPT User Manual Manual pdf 55 page image

49Programming Device Timers (cont’d)00 ON TIME ?00:00 PM1. Enter the time you want the device turned ON using 00:01 -11:59 format.2. Press the [∗] key to move to the AM/PM field. Press any key 0-9 tochange the AM/PM indication.NOTE: Enter 00:00 if this timer is not being used (no ON timeis required).00 OFF TIME ?00:00 PM1. Enter the time you want the device turned OFF using 00:01 -11:59 format.2. Press the [∗] key to move to the AM/PM field. Press any key 0-9 tochange the AM/PM indication.NOTE: Enter 00:00 if this timer is not being used (no OFF time isrequired).00 DAYS? MTWTFSSHIT 0-7 X X1. Select the days on which the device is to be activated by entering1-7 (Monday = 1).2. An "X" will appear under that day, indicating the output for thatday is active.3. Entering a day's number again will deactivate that day. Pressing 0will turn all days on/off.The outputs will only be in effect for the days that have the letter xunderneath them. As the week progresses, the days are reset to theinactive state, unless the permanent option is selected (next screenprompt). When completed, press [∗] to continue.00 PERMANENT ?0 = NO, 1 = YES 0Answering 1 (YES) means the system executes this timercontinuously.Answering 0 (NO) means the system executes each day's output onlyonce.