Honeywell VISTA-128BPT Installation And Setup Manual

Also see for VISTA-128BPT: User guide Overview Programming guide User guide Installation and setup guide

Contents

Honeywell VISTA-128BPT Installation And Setup Manual Manual pdf 64 page image

VISTA-128BPT/128BPT-SIA/250BPT INSTALLATION AND SETUP GUIDE5-8Open/Close Schedule ProgrammingAfter entering Scheduling Menu Mode, press [0] until the “O/C Schedules?” prompt appears.PROMPT EXPLANATIONO/C Schedules ?1 = YES 0 = NO 0Enter 1 to program opening and closing schedules.Partition # ?01-08, 00 = Quit 01Enter the appropriate partition number for which the following open/close schedules will apply.Enter 00 + [∗] at the “Partition #?” prompt to quit open/close schedules programming and displaythe “Quit ?” prompt.Mon P1 OP WIND.?00:00 00:00 00Enter the time window number 01-20 for the displayed day’s opening schedule beginning withMonday.Enter 00 if no schedule is desired for a particular day. As the number is keyed in, the actual timethat has been stored for that window number is displayed as a programming aid.Press [∗] to accept the entry.Mon P1 CL WIND.?00:00 00:00 00Enter the time window number for the displayed day’s closing schedule. As the number is keyedin, the actual time that has been stored for the window number is displayed.Press the [∗] key to accept the entry.Tue P1 OP WIND.?00:00 00:00 00The keypad now prompts for Tuesday’s open/close schedule. Follow the procedure for Monday’sprompts.When the last day of the week has been programmed, the holiday opening and closing windowprompts are displayed.Hol P1 OP WIND.?00:00 00:00 00Repeat the procedure for the holiday opening and closing time windows.Press the [∗] key to accept the entry.When the entries are completed, the “Partition #?” prompt is displayed again. Repeat thisprocedure for each partition in the system.Quit ?1 = YES 0 = NO 0Enter 0 at the “Quit ?” prompt to return to the main menu choices and continue programming.Enter 1 to quit Scheduling Menu Mode.Holiday SchedulesA holiday schedule overrides the regular daily open/close schedule on the programmed holidays throughout the year.The system provides up to 16 holidays that can be assigned for the system. Each holiday can be assigned to anycombination of partitions but must always be assigned to Partition 1. List the desired holidays in a Month/Day formaton the worksheet. Check the partitions for which these holidays apply.Holiday Schedule WorksheetThe following worksheet is an example of the worksheet found in the Programming Guide.HOL PartitionMonth/Day 1 2 3 4 5 6 7 81 /2 /3…16