Honeywell TRADELINE VR4304 Manual

Honeywell TRADELINE VR4304 Manual Manual pdf 1 page image

1 69-0838a Capacity based on 1000 Btu/feet3, 0.64 specific gravity natural gas at 1 inch wc pressure drop [37.3 MJ/meter 3, 0.64 specificgravity natural gas at 0.25 kPa pressure drop].Size(Inlet x Outlet)Capacity (at 1 inchwc pressure drop)a MinimumRegulated CapacityMaximumRegulated Capacity1/2 x 1/2 240 feet3/hour[6.8 meter3/hour]30 feet3/hour[0.8 meter3/hour]340 feet3/hour[9.6 meter3/hour]1/2 x 3/4 270 feet3/hour[7.6 meter3/hour]30 feet3/hour[0.8 meter3/hour]370 feet3/hour[10.5 meter3/hour]3/4 x 3/4 300 feet3/hour[8.5 meter3/hour]30 feet3/hour0.8 meter 3/hour]415 feet3/hour[11.8 meter3s/hour]J.D. • 4-94 • ©Honeywell Inc. 1994 • Form Number 69-0838VR4304Intermittent PilotCombination Gas ControlApplicationThese intermittent pilot gas controls are used in gas-firedappliances with capacities up to 300 feet 3 /hour at 1 inchwc pressure drop [8.5 meters3/hour at 0.25 kPa] for naturalgas. They include a manual valve, two automatic operators,a pressure regulator, pilot adjustment and a conduit cover.The ambient temperature range for the standard-openingTRADELINE® model (VR4304M) is -40° to +175° F[-40° to +79° C].BODY PATTERN: Straight-through.INLET X OUTLET SIZES AVAILABLE: 1/2 x 3/4 inchand 3/4 x 3/4 inch.This TRADELINE gas control comes with two 3/4 to1/2 inch NPT bushings and one 1/2 to 3/8 inch NPTbushing.ADAPTERS: Adapters available for 1/2 and 3/4 inchstraight and angle connections. Refer to Table 2.ELECTRICAL RATINGS:Voltage and Frequency: 120 Vac, 60 Hz.Current Draw: 0.14A.TRADELINE®CAPACITY:Use conversion factors in Table 1 to convert capacitiesfor other gases.TABLE 1—GAS CAPACITY CONVERSION FACTORS.GasSpecificGravityMultiply ListedCapacity ByManufactured 0.60 0.516Mixed 0.70 0.765Propane 1.53 1.62TABLE 2—ADAPTER (FLANGE) PART NUMBERS.Part NumberInlet/OutletPipe SizeFlangeTypeWithoutHexWrenchWithHexWrench1/2 inch NPT Straight 393690-6 393690-16Elbow 393690-3 393690-133/4 inch NPT Straight 393690-4 393690-14Elbow 393690-5 393690-15NOTE: Flange Kits include one flange with attached O-ringand four mounting screws.APPROVALS:American Gas Association design certificate:L2025007.Canadian Gas Association design certificate:L2025007.Australian Gas Association design certificate:Applied for.Delta C.