Honeywell T7560B Manual

Also see for T7560A: Installation instructions Installation instructions User manual

Honeywell T7560B Manual Manual pdf 1 page image

® U.S. Registered TrademarkCopyright © 2008 Honeywell Inc. • All Rights Reserved EN0B-0237GE51 R0208T7560A,B,C Digital Wall ModuleHONEYWELL EXCEL 5000 OPEN SYSTEMSPECIFICATION DATAGENERALThe T7560A,B Digital Wall Modules (DWM) display andprovide space temperature, setpoint, Occupied/Unoccupiedoverride, and fan mode/speed selection for the HoneywellExcel 10 W7750, W7751, W7752, W7753, W7761, W7762,W7763, and Excel 600, 500, 100, 50, 20 Controllers, asapplicable (a software module ModAL is available to adaptthe wall module to the respective Excel 20, 50, 100, 500, 600controller. See T7560A,B,C Installation Instructions (productliterature no.: EN1B-0146GE51) for details.Using the three buttons, the user can change roomtemperature setpoint, fan mode/speed, initiate/cancel bypass,and change configuration information such as the DWM’sengineering units.The T7560C Digital Wall Module (see inset above) has nouser interface (e.g. LCD, buttons, or setpoint dial) and issuesonly temperature and humidity values.These wall modules are not compatible with HoneywellW7751A,C,E,G (VAV1) and W7752D1 (FCU1) Controllers.FEATURES• Fully compatible with all current Excel 10 and Excel20 to 600 controllers.• Low power consumption.• Integral 20kΩ NTC sensor.• Separate mounting base for easy installation.• Tamper-resistant locking cover.• IP30 housing.• T7560A and B, only:- LCD display continuously shows current spacetemperature, occupied/unoccupied/standby mode,fan status/mode, humidity, as configured.- Push-button interface for full navigation andchange control of wall module functions.- Single-touch occupied/unoccupied override.- Setpoint dial for setpoint adjustment.- Fan Speed/Mode commandable from buttons.- Selectable °F/°C temperature display.- Selectable setpoint type, absolute or relative.