Rev. B 6-40 HMXMC00101331-Mar-066.12 DEFINING AUXILIARY CONTROL OUTPUTSelection of the Auxiliary Control Outputs tab allows for direct editing of all theproperties for each control output. The details of each of the properties are describedbelow.Figure 6.10: Auxiliary Control Output TabAuxiliary Control OutputsControl OutputNumberThe Control Output Number is purely a reference number used todistinguish one control output from another. The control output number fieldis NOT a changeable field.Description This is an 18-character description used to identify the control output. It isnot used by MAXPRO-Net at all and it is purely for operator reference.Enter up to an 18-character description and press Enter on the keyboard.Subrack ID Specifies the subrack ID number where the control output module resides.The valid range is 1 – 99. If a high level or mimic panel output is being used,the number is prefixed with an “H”. If a keyboard output is being used thenumber is prefixed with a “K”.Enter the subrack ID number and press Enter on the keyboard.For VideoBlox Subrack, this represents the ‘V’+communication portnumber to which the VideoBlox alarm concentrator AVBPIT is connected.Valid range: ‘V’+maximum communication ports.
