Rev. B 6-39 HMXMC00101331-Mar-06External Alarm InputsNetwork Alarm When the current alarm input is actually connected to another MAXPRO-Netsystem within a network configuration, the NETWORK ALARM field is usedto specify the exact location and reference for the alarm input device.e.g. #03:A1234 - the actual alarm input resides on network node 3and is defined on node 3 as alarm 1234.LINK - signifies that status changes of the current alarminput will be broadcast on the network.For more details, please refer to the NETWORKING section of the user’sguide.Enter the location and reference for the alarm input (if applicable) and pressEnter on the keyboard.Alarm Start Macro When an alarm condition is detected for an alarm input, the ALARM STARTMACRO is executed. This can be used to perform automatic system controlfunctions.Please refer to the MACRO GUIDE for more details on the macrofunctionality.Enter the desired macro number in the field and press Enter on thekeyboard.Alarm Finish Macro When a detected alarm input returns to its normal state, the ALARM FINISHMACRO is executed.Please refer to the MACRO GUIDE for more details on the macrofunctionality.Enter the desired macro number and press Enter on the keyboard.
