3                            !"        SETTING THE SYSTEMBefore SettingBefore setting the system ensure all doors and windows are securedand areas protected by movement detectors are free from obstruction.Entering A Pin - User Level 1-2As each digit is entered the keypad responds with a bleep and displaysa *. When all the digits are entered, press the ent or A > key to start thesetting routine.Entering A Pin - User Level 3 - 6As each digit is entered the keypad responds with a bleep and displaysa *. When all the digits are entered press the A > key to start the settingroutine.Setting groupsWhere group choice has been assigned to the PIN, select which groupshave to set as part of the setting routine. The set status of each group isdisplayed on the keypad screen. Possible status options are :-R = Ready (Groups is unset, and all zones are closed)F = Faulted (Group is unset, and at least one zone is open)S = Set (Group is set)L = Lockout (Group is locked out, and cannot be unset)Select which groups have to be to set by entering the number of thegroup. For example, to set groups 2 and 3 press keys 2 and 3 . Thedisplay changes to indicate the groups selected for setting. Pressingthe ent key starts the setting routine for the specified groups.The Galaxy 500, 504 and 512 have more than 8 groups. If the user hasgroup choice, the available groups will be displayed at the keypadfollowing a valid code + A >. The groups will be displayed showingA1 to A8. Use both A > and < B keys to scroll to the various sets ofgroups. If the user does not have group choice, entering the PIN andA > will cause all groups assigned to the user to set.Exit timeIf all the system zones are closed when the setting routine is started,the display indicates the remaining time, in seconds, to vacate thepremises. Exit the building using the agreed route.

KEYPAD INFORMATION

Enter Key (ent)

SETTING THE SYSTEM

Sounder

MICROMAX SETTING OPTIONS

UNSETTING THE SYSTEM

MENU OPTIONS

Accessing The Menu

Omit Zones (User Level 3 And Above)

Atm 1/2/3/4 Zones (512 Only)

Chime (User Level 3 and Above)

Status

Additional Information

Walk Test (User Level 5 and Above)

Time/Date (User Level 6)

Codes (User Level 6)

Selecting Codes

Modify Level

Quick Menu

Temporary Codes (Galaxy 128, 500, 504 and 512)

Modify Groups (Galaxy 18, 60, 128, 500, 504 and 512)

Group Choice

Max Function

Pin Warning

Groups (Pre V4 Only)

AVOIDING FALSE ALARMS

ZONE REFERENCE TABLES

ALARM AND HELP MESSAGES

INSTALLER DETAILS

Honeywell Galaxy 8 User Manual

Galaxy 128

user guide

Keypad Information

hash key

Setting the System

Unsetting the System

Menu Options

Accessing the Menu

Omit Zones

ATM Zones

Chime

Walk Test

Changing Time

Codes

Modify Name

Temporary Codes

Modify Groups

MAX Function

PIN Warning

Groups

Avoiding False Alarms

Zone Reference Table

alarm and help messages

Installer Details

Full Menu

Vibration Zones

Non-omittable Zones

Address

Selecting a date

Help Message

Ending Walk Test

Advance and Retard

Duress Code

Section 1: Quick Setup

Section 2: System Operation

Direct Access

Exiting from Engineer Mode

Multi User Access

Section 3: Setting Options

Card Setting Options

Setting Features

Omitted Zones

Abort Time

Section 4: Menu Options 11-19

Option 12 – Timed Set

Option 17 – Instant Part

Section 5: Display Options

Option 22 – Display Log (Quick Menu Option 4)

Option 23 – System (Galaxy 18, 60, 128, 500, 504 & 512)

Option 24 – Print (Quick Menu Option 5)

Option 25 – Access Doors

Section 6: Test Options

Option 32 – Outputs

Section 7: Modify Options

Option 42 – Codes (Quick Menu Option 8)

Default Codes

Escaping from Engineer Mode

Programming Codes

Option 43 – Summer (Quick Menu Option 9)

Option 45 – Timer Control (Galaxy 18, 60, 128, 500, 504 & 512)

Option 46 – Group Omit (Galaxy 18, 60, 128, 500 & 504)

Option 47 – Remote Access

Option 48 – Engineer Access (Galaxy 512 only)

Option 49 – Datelock (Galaxy 512)

Section 8: Engineer 1

Option 52 – Program Zones

System Alarms

Option 53 – Program Outputs

Attributes

Output Functions

Option 54 – Links (Galaxy 18, 60, 128, 500, 504 & 512)

Option 55 – Soak

Option 56 – Communications

Telecom Module

RS232 Interface Module

ISDN Module

Ethernet Module

Option 57 – System Print

Option 58 – Keypad

Option 59 – Quick Menu

Section 9: Engineer 2

Option 62 – Full Test (Galaxy 18, 60, 128, 500, 504 & 512)

Option 63 – Options (Galaxy 18, 60, 128, 500, 504 & 512)

Option 64 – Assemble Zone (Galaxy 18, 60, 128, 500, 504 & 512)

Option 65 – Timers (Galaxy 18, 60, 128, 500, 504 & 512)

Option 66 – Pre-checks (Galaxy 60, 128, 500, 504 & 512)

Option 67 – Remote Reset

Option 68 – Menu Access (Galaxy 60, 128, 500, 504 & 512)

Appendix A : Door Control - MAX (MX01)

Mounting the MAX

Configuring a MAX Reader into the System

Configuring as On-Line MAX

Removing a MAX Reader from the System

Operating Instructions (On-Line Modes)

Max Events Print-Out

Appendix B: Library

Appendix C: SIA and Contact ID Event Codes

Appendix D: SIA Event Structure

Appendix E: Event Log Messages

Galaxy 18Galaxy

Galaxy 500

Galaxy 504

Galaxy 512

Galaxy 60

Galaxy 8

Honeywell Galaxy 8 User Manual

Product

Learn More

Legal