Meet Your Mailing System202Power ManagementEnergy Star® ComplianceYour mailing system is an Energy Star® qualified mailing system that automaticallygoes into a low-power 'Sleep mode ' after a period of inactivity.The mailing system automatically switches to 'Sleep mode' after 30 minutes of non-activity. You can change this default setting in supervisor mode. You can also switchto a low-power mode by pressing the Sleep/Wake button.A very-low-power sleep mode called 'Soft off mode ' is also available. This modeshould only be used for long periods of non-use of the system. In this mode, thesystem takes longer to wake up and the automatic postal updates cannot take place.See also• To change the low-power modes time-outs, see:How to Change the 'Sleep time-out' (User) p.127 .How to Switch to 'Sleep' or 'Wake' ModeHow to Switch to'Sleep' or 'Wake'Mode1 Press to switch between 'Sleep' and 'Wake' modes.- A short press on the Sleep/On/Soft off mode button sets thesystem to 'Sleep' mode.- A long press on the Sleep/On/Soft off mode button sets thesystem to 'Soft off '.- The light located next to the key indicates:- Green : the mailing system is inAwake mode and ready foruse.- Amber (continuous) : the mailing system is inSleep mode(low-power mode).- Amber (blinking) : the mailing system is inSoft off mode(very-low-power mode).2.4 Power ManagementTo avoid weighing errors, make sure the Scale is clear whenwaking up the system. If the system does not seem to display acorrect weight, seeWeighing Problems p.179 .
