Harrod VOL-050 Instructions Manual

Harrod VOL-050 Instructions Manual Manual pdf 1 page image

Code:Product:INS691Revision 924/10/17Harrod UK Limited©View of ProductMATCHPLAY VOLLEYBALLVOL-050Pack Contents:1. 1 x Matchplay VBL Winder Post (FEQ971)2. 1 x Matchplay VBL Base including fittings (FEQ976)3. 1 x Matchplay VBL Dummy Post (FEQ970)4a. 2 x Brace (PEQ973)4b. 1x Straps(pair)(packed with FEQ970/971)(packed with FEQ971) (FPK971)Fittings Pack (packed within base)5. 2 x M10 Nylock Nut (BOL202)6. 6 x M10 Unistrut Nut (BOL204)7. 8 x M10x20 Set Screw (BOL342)8. 2 x M10x40 Hex Bolt (BOL322)9. 2 x Base Back Plate (PEQ976)10. 4 x ‘T’- Bolt (PEQ977)14a32MAKE SURE YOU READ THESEINSTRUCTIONS CAREFULLY BEFOREASSEMBLING YOUR POSTSFloor Socket Installation:All sockets should be installed by a specialist, using thefollowing guidelines. Please contact your distributor forrecommended specialist fitting engineers.Mark at location shown in FIG.1. Drill Ø20 holes to thedepth to suit purchased sockets. Socket centres are 11mx 0.4m (NOTE: 11m is the Harrod suggested centres, thiscan range between 10.98m and 11.98m to meet therregulation distance between upright and sideline).Note: Longer sockets are required for sprung floors(contact your distributor for guidance).0.5 to 1m 9m OUTER SIDELINES OF COURT11m SOCKET CENTRES (see note above)FIG.1FPK970Floor sockets are not included and should be orderedseparately.Solid Floors require 4 off SHP-001Suspended Floors require 4 off SHP-100Net Not Included0.5 to 1m0.4mSocket Installation Dimensions - Plan View490mm11m CENTRES (this will position the front of the upright 510mm to the sideline)(This dimension is suggested for guidance, see note above)

/ 2

Related manuals for Harrod VOL-050