SHE-010/015/020/025/030/035/076Premier Curved Team ShelterINS204Revision 805/05/2017Harrod UK Limited©Code:Product:Pack Contents:IMPORTANT NOTESAt least THREE people are required to safely assemblethis shelter.This shelter must be assembled on a flat surface.Failure to do this may result in bolt hole misalignment.If the shelter is to be bolted into concrete, there shouldbe at least 100kg of concrete at each anchor point (Eg:350x350x350mm Cube).WHEN THE SHELTER IS FULLY ASSEMBLED IT MUSTBE ANCHORED TO PREVENT MOVEMENT ANDTOPPLING. PLEASE SEE YOUR DISTRIBUTOR FORANCHORING OPTIONS.Page 1TOOLS REQUIRED1 x Rachet with deep drive socket or T-HandleNut Driver (supplied as FAS005)1 x Rachet with 1 socket2 x 13mm Spanners1 x Pozi Head Screw DriverSilicone based lubricant/fairy liquid10mm1 x Mallet3mmPlease read these assembly instructionscarefully before starting to assembleyour shelter.General Info1.2.1 x L/H SIDE FRAME (1 x R/H SIDE FRAME (3.4.5.6.7.8.BENT SUPPORTS (1 x Bent Supports (PEQ049)BUCKET SEATS (Pair) (A-3 Stadium Seat (Red) (PLA049)A-3 Stadium Seat (Blue) (PLA044)A-3 Stadium Seat (Green) (PLA043)1 x CROSSBAR & BACKBAR (4M) (1 x CROSSBAR & BACKBAR (5M) (1 x CROSSBAR & BACKBAR (6M) (1 x Backbar1 x Crossbar2 x Retaining barRETAINING TUBES (Retaining Tube (PEQ078)FEP042)1. 1 x L/H SIDE FRAMEFEP043)2. 1x R/H SIDE FRAMEFEP049)FEP045/046)FEP044)FEP041)1 x CROSSBAR & BACKBAR (5M)FEP040)FEP047)(Pre drilled for curtain)(Pre drilled for curtain)(Pre drilled for curtain)(FEP784)(FEP782)(FEP785)9.10.1112.PET BACK SHEET (PLP047)1 x SEAT SUPRT FRAME (4M) (FEP053)1 x SEAT SUPRT FRAME (5M) (FEP055)1 x SEAT SUPRT FRAME (6M) (FEP057)Seat Support (PEQ044). End Support (PEQ052)BACK SUPPORTS (4/6M) (FEP079)5 x BACK SUPPORTS (5M) (FEP077)950mm Back Support (PEQ079)FEP054)FEP058)FEP056)FPK040)FPK041)FPK042)(Packed with Seat Support Frames)13. 1 x SEAT SUPPORT (4M) (1 x SEAT SUPPORT (5M) (1 x SEAT SUPPORT (6M) (1 x BOLTS PACK (4M) (1 x BOLTS PACK (5M) (1 x BOLTS PACK (6M) (4m Shelter 5m Shelter 6m Shelter Part No.14. M8 Nutcap 4 4 4 (CAP951)15. 32mm Cover Cap (Top) 3 4 5 (CAP096)16. 32mm Cover Cap (Bottom) 3 4 5 (CAP097)17. M8 Hex Nut 4 4 4 (BOL400)18. M8 Nyloc Nut 39 48 57 (BOL402)19. M8 Washer STST 9 12 15 (BOL715)20. M8 Skiffy Washer 48 56 64 (BOL722)21. M8 * 20 Set Screw S/S 4 4 4 (BOL546)22. M8 * 80 Hex Bolt S/S 30 36 42 (BOL472)23. M8 * 40 Hex HD Bolt S/S 6 8 10 (BOL520)24. M8 * 90 Hex Bolt S/S 3 4 5 (BOL450)25. 14G 60mm Self Tapping Screw 8 10 12 (BOL771)26. 16mm Round Insert 5 6 7 (CAP095)27. Crossbar Cap 2 2 2 (PEP050)28. 10G * ½” Self Tapping Screw 4 4 4 (BOL782)29. 10mm T-Handle Nut Driver 1 1 1 (FAS005)