Harman Allure50 Owner's Manual

Also see for Allure50: Owner's manual Installation manual

Contents

Harman Allure50 Owner's Manual Manual pdf 10 page image

Harman® • Allure50 Owner’s Manual_R3 • 2016 -___ • 09/16103-90-888000cJ. Cleaning Prompts, Messages and ErrorsYour EASY Touch Control communicates with you by showing messages on the top center of the EASY Touch Control homescreen. If you have more than one message, the messages will show consecutively until you acknowledge the message byperforming the task and reset. These communications include:PROMPTSMESSAGESERRORSClean your stove. Call your Harman Dealer if problempersists.When prompted, scrape burnpot. Press checkmark to reset.When prompted, inspect and empty ash pan as needed.Press checkmark to reset.When prompted, inspect and perform total clean. Presscheckmark to reset.Press checkmark if you filled the hopper. If you did not fillhopper, The message will disappear in 30 seconds.Replace the 2 “AA” batteries in the Wireless Remote Sensor.If Wireless Remote Sensor batteries die, the Back UpSensor will continue to heat your home.Check and close the front and ash doors for the stove tocontinue to heat.Close the hopper lid for the stove to continue to heat.Fill the hopper with pellets. Press checkmark to reset. Ifyou did not fill the hopper, the message will stop after 30seconds. This error only appears if “Show Fuel Gauges” isturned on.Batteries in Wireless Remote Sensor have expired. Replacethe 2 “AA” batteries.Return Air Sensor has failed. Call your Harman Dealer.Unit has failed to ignite. Scrape the burnpot. Call yourHarman Dealer if problem persists.Touch Control has lost communication to the stove. Callyour Harman Dealer.Exhaust Sensing Probe (ESP) as failed. Clean the ESP. Ifissue persists, call your Harman Dealer.