Hanna Instruments HI 98701 Instruction Manual

Also see for HI 98701: Instruction manual

Contents

Hanna Instruments HI 98701 Instruction Manual Manual pdf 4 page image

76INITIAL PREPARATIONINITIAL PREPARATIONINITIAL PREPARATIONINITIAL PREPARATIONINITIAL PREPARATIONEach meter is supplied complete with batteries. Remove the backcover, unwrap the batteries and install them while paying attention tothe polarity. Alternatively, connect the HI 710005 or HI 710006voltage adapter to the power adapter plug.To prepare the instrument for use, choose the most appropriate tem-perature probe(s) for your application (see accessories) and connect it(them) to the connector(s) located on the top of the instrument.With the meter facing you, channel #1 is the first connector on thetop left hand side.To switch the meter on, press the ON/OFF key.The batteries charge status or "LINE" message(if external power adapter is connected) will bedisplayed on the LCD for a few seconds.The meter is now ready to operate.To maximize battery life, the meter is automatically switched off after auser selectable period of non-use (this feature is enabled and set to 5minutes by default; it can be disabled or changed through setup code40). If in logging mode, after the period of non-use, the meter willcontinue to monitor the temperature periodically at the end of everylogging interval. Only the "LOG" indication will be visible on LCD.While storing data in memory, during the sleep mode, the reading willappear briefly on the LCD.To reactivate the display press the ON/OFF key.Note: When the use of an alternate function (FNC, CFM and LOTINFO) is requested, press and hold the ALT key first and thenthe second listed key.ON/OFFSPECIFICATIONSSPECIFICATIONSSPECIFICATIONSSPECIFICATIONSSPECIFICATIONSRange K -200.0 to 999.9 °C ; 1000 to 1370 °C-300.0 to 999.9 °F ; 1000 to 2500 °CJ -200.0 to 760.0 °C-300.0 to 999.9 °F ; 1000 to 1400 °FT -200.0 to 400.0 °C-300.0 to 750.0 °FResolution K 0.1°C (-99.9 to 999.9 °C); 1°C (1000 to 1370 °C)0.2 °C (-200.0 to -100.0 °C)0.2°F (-199.9 to 999.9 °F); 1°F (1000 to 2500°F)0.3 °F (-300.0 to -200.0 °F)J 0.1 °C (-149.9 to 760.0 °C)0.2 °C (-200.0 to -150.0 °C)0.1 °F (32.0 to 999.9 °F); 1 °F (1000 to 1400 °F)0.2 °F (-300.0 to 32.0 °F)T 0.1 °C (-99.9 to 400.0 °C)0.2 °C (-200.0 to -100.0 °C)0.1°F (300.0 to 750.0°F);0.2°F (-149.9 to 300.0°F)0.3 °F (-300.0 to -150.0 °F)Accuracy ±0.5 °C (-200.0 to 999.9 °C); ±1°C outside(@20°C/68°F) ±1°Ffor one year (excluding probe error)Typical EMC Dev. ±5 °C; ±9 °FChannels HI98701/HI98801: 1 channelHI98704/HI98804: 4 channelsProbe K , J or T-type thermocoupleCold Junction sensor NTC 10K ; 0.1°C resolution ; ±0.3°C accuracyPrinter Low power impact type-belt, 14 charactersper line; 38 mm plain paper (HI 710034)Printing/Logging 1, 2, 5,10, 15, 30, 60, 120 and 180 minutesIntervalAuto shut-off Selectable at 5, 10, 15, 30, 45 or 60 minutesPower supply 4x1.5V AA alkaline type/350 hours typical life(with 2700mA/h batteries, without printing andbacklight).12 VDC adapter (HI710005 or HI710006)Environment 0 to 50°C (32 to 122°F);0-95% RH non-condensingDimensions 220 x 82 x 66 mm (8.7 x 3.2 x 2.6")Weight 500 g (18 oz)