Hanna Instruments HI 9828 Instruction Manual

Also see for HI 9828: Instruction manual

Hanna Instruments HI 9828 Instruction Manual Manual pdf 19 page image

21Chapter 3 - SETUP MODEA few parameters have to be set before taking any measurements. In the mainmenu two setup options are available: “Measurement” and “System”.Measurement setup allows to set the displayed readings and their units, whilethe system setup is used to set all system parameters, as the interface language,date and time, LCD contrast, acoustic signals, etc.3.1 MEASUREMENT SETUP• Switch the meter on by pressing on/off.After the initialization has been completed, themeter enters the measurement mode. The activesoftkeys are and .• Press , select “Measurement Setup” us-ing the arrow keys, then press .• The display shows the complete list of measur-able parameters.• To select a parameter, scroll with the arrow keys.Each parameter can be enabled or disabled. A checked box or the measure unitmeans that the parameter is enabled. Press the right softkey to enable or disablethe parameter.Some parameters also allow to select measure unit and resolution by pressingthe or softkey respectively.NoteNoteNoteNoteNote If the password protection is enabled, the meter will ask to insert thepassword prior to change the first parameter.TemperatureThe user can select the measure unit: °C, °F or K.