Hanna Instruments HI 9828 Instruction Manual

Also see for HI 9828: Instruction manual

Hanna Instruments HI 9828 Instruction Manual Manual pdf 41 page image

41different file name” appears. Press OK to insert a different name.• Add a remark: press YES or NO. If YES is pressed and a remark list alreadyexists, it is possible to select the desired annotation or press NEW to insert a newremark; a textbox appears for inserting a note for the logged sample.• Tag reading: the last option allows to associ-ate the logged sample to a tag. “Touch the tagwith the tag reader” appears. Press SKIP if notags are available.• Touching the tag the relative ID appears. If noID is associated to the tag, the serial number appears.• Press TAG ID to insert an identification code for the used tag and then pressOK.NOTES: It is possible to create the logging list and the relative remarks beforetaking measurements and logging. See paragraph 5.2 Log data Setup.It is possible to abort the logging procedure at any time, by pressing theESC softkey repeatedly.In case of continuous logging, the data collection will start after thelast options will be confirmed instead of a single log where the data willbe stored after LOG is pressed.5.2 LOG DATA SETUPTo set lots, insert remarks, review logged or plot-ted data and also to delete lots, from the mainmenu select LOG DATA with the arrow keys.A list of available functions appears.5.2.1 LotsThis option allows to insert a new lot or to select the lot where to memorize thenext sample.