Menu
Hammond SK1 Owner's Manual
Also see for SK1: ManualIntroductionManualManualManual
                                                                                                                                                              | |
Contents
| 
*# 1 Sk1 / Sk2 Owner’s Manual74 DRAWBARDrawbar sound parameters for each keyboard are set in this mode.To locate this mode:SETTING FOR MANUAL (LOWER & UPPER) DRAWBARSORGAN TYPESSelect the manual keyboard organ type.BType1: Traditional B-3/C-3 tone-wheel soundBType2: Sound with more leakage noise and wow-flutterMellow: With transparent sine wavesVx: Transistor Organ, Vx typeFart: Transistor Organ, Farf typePipe: Pipe OrganWhen the organ type is set at Vx, Farf, or Pipe, the parameters (2) to (6) are unavail-able.CLICK - ATTACK LEVELSets the key-on click volume.The higher the value, the louder the click gets. No key-click at 4. As the value goeslower than 4, the attack rate becomes slower.CLICK - RELEASE LEVELSets the key-off click volume.Th e higher the value, the louder the click gets. No key-click at 4. As the value goeslower than 4, the release rate becomes slower.CLICK - LOW PASS FILTERSets the key-click tone.The setting range is 0 to 127. The higher the value, the brighter the sound.FOLDBACK - LOWSets the key-point from which the 16´ Drawbar folds back (= repeat the same octaveon the lower octaves of the keyboard).The bottom key on the keyboard is displayed as “1C”. The setting range is 1C to 2C.FOLDBACK - HIGHSets the key from which the 1´ Drawbar folds back (= repeat the same octave on thehigher octaves).The setting range is 4G to 5C.NOTE: The Fold-back is possible not only with 1´ but also with 11⁄3´, 13⁄5´, 2´, 22⁄3´ Drawbars.ORGAN VOLUMESet the volume for the entire organ section. The setting range is 0 to 127.UPPER ZONE OCTAVESet the octave shift for the UPPER part. The setting range is -2 to +2.UPPER ZONE LOWUPPER ZONE HIGHSet the sounding range of the UPPER part with these two parameters.TONE-WHEEL SETThere are variations available for each virtual Tone-Wheel set of BType1, BType2 and Mellow. (P. 87)KEY CLICKOn the traditional models such as B-3/C-3, a noiseoccurred when keys were pressed and released,due to the mechanical keying system employed onthe classic organs. That characteristic is replicatedhere.TimeLoudnessAttackRateReleaseRateAttackClickReleaseClickNote On Note OffEXAMPLES OF KEY-CLICK SETTINGSSimulation of classic multi-contact keyboard B-3and C-3: AT = 8, RL = 8Simulation of a PCM synthesizer to produce thekey-click only at ‘attack’: AT = 8, RL = 4Slow envelope like a pipe-organ: AT = 0, RL = 0FOLD-BACKAs the number of the Tone-Wheels was limited onthe B-3/C-3, the very highest and lowest pitches“folded back” on the keyboards, sounding thesame octave twice in a row. This function repro-duces this characteristic.See the “Function mode” (P. 68) for operational details.ENTERMENU/EXITHOW DOES THE ORGAN VOLUME WORK?The organ volume adjusts just the volume aftermulti-effects unlike the Expression. It is useful forset the volume of each Patch, or set the level bal-ance between organ and extra voice section. |
Related manuals for Hammond SK1
Product
Learn More
Legal
Copyright © 2024 OneStart. All Rights Reserved