Haier XPB88-LS User Manual

Contents

Haier XPB88-LS User Manual Manual pdf 15 page image

After using, please clean the lint and foreign materials of the lint filter and overflow filterin time. Otherwise it may influence your using the machine.Please first pull off the power plug from the receptacle before cleaning.1 Take off the overflow filter.As indicated in the figure, nip the elastic fixingclaw and pull it to the direction of the arrow totake it off.Cleaning the overflow filterToo much lint on the overflow filter will influencethe normal usage of the machine. Pleaseclean it every two months.Elastic fixingclawFigure 2Figure 3Figure 11. Take off the lint filterPut hand at the indicated position.Push down to take it off. ( See toFigure 1)2. Clean the lintPut it in water and clean while it isstill wet.(See to Figure 2)3. Install the lint filterAfter cleaning, insert the bottomof the lint filter ( marked with"down side") into the overflow filter ,then push the upper part of thefilter in ( marked with " up side ").(See to Figure 3)The lint filter must be used during washing.It must be cleaned in time after each using.Cleaning the lint filterUsing processUsing processDisposal after washing