Haier HWM100-198 User Manual

Contents

Haier HWM100-198 User Manual Manual pdf 9 page image

How to choose washing cycle and washing timeSounds during operation of washing machineFollows will help you to choose the right washing cycle for the fabrics you are washing.Every cycle is set according to the type and soil degree of the fabrics.There is pause step in every cycle, it is normal if it happens during washing.Saturated soak(20 minutes): use this option for the heavy-soiled fabrics, for every 3minutes interval, the fabrics will be agitated 1 minute. In order to improve the cleaning,please use 2 times the amount of recommended detergent(Soak time can be selectedaccording to your need).REGULAR cycleREGULAR cycle is used for normal soiled fabrics, this cycle combine the high-speed washingand short high-speed spin. This cycle is mainly used for cottons and linens, you can choosethe washing time according to the soil degree of the fabrics, 6 minutes for light-soiled fabric,12 minutes for heavy-soiled fabrics.PERM PRESS cycleThis cycle is one kind of the delicate cycle, which rinse 2 times, the cold water wash can beused to prevent the fabrics from wrinkling. This cycle is for heavy-duty fabrics or synthetics.You can choose washing time according to the soil degree of the fabrics.DELICATES cycleThis cycle can use low speed wash action to remove the soil, the low speed spin can preventthe fabrics from wrinkling. For light soiled delicate fabrics, use this cycle.HAND WASHABLE cycleThis cycle, low speed wash 20s in every internal of about 20s, this cycle is suitable for thefabrics needed special care. The low speed spin can prevent the fabrics from wrinkling.Rinse and spinIn all above cycles, PERM PRESS cycle rinses 2 times , and other cycle rinses 1 times. It isnecessary of additional rinsing when washing heavy-soiled fabrics with superfluousdetergent or special care fabrics.When the cycle is completed, If you want to rinse once more, push in the button and turnthe knob in clock wise direction to "rinse " in "NORMAL" cycle(drain-spin-fill-rinse-drain-spin).SpinIf you need separate drain and spin, you can operate as follows:Push in the button and turn the knob to the "spin " in "NORMAL" cycle.Pull out the knob, the washing machine start to drain then spin.The following sounds shall be the normal sounds of washing machine in operation:Wash cycleIf the low water level is selected for washing a small amount of laundry, you may hear "kada"sound from agitator due to the lower water level in washtub, this is normal washing sound.Draining stageThe draining speed of washing machine is dependent on the installation of it. When the wateris quickly drained out from the washing machine, you hear the sound of drawing of the air tothe drain pump. This phenomenon may appear in the final draining stage.After draining and before spinningWhen the wash cycle turns from draining to spinning, the sound of gear meshing and pulleropening may be heard.Wash Cycle and sound