Outer drain hosecomponent Drain hose hookDrain hose jointInstallation and adjustmentPlease install and adjust the machine according to the requirement of the manual. It isvery important to your security and correct operating the machine.Adjust the installation positionThe largest allowed slope of the base of the machine is 2 . The slanting or roughground will result in unstable running or stoppage of the machine. Please adjustit with following methods:Confirm it's horizontal:Hang the lead line to confirmif it is horizontal.Adjust the adjustable foot:1.To twist the adjustable foot, please first lift upthe side of the foot slightly, and twist the foot.2.Fasten the nut after adjustment.High LowAdjustable footInstall the drain hoseUsage of the drain hoseDrain hose clampFirst install the drain hose hook on the parts ofouter drain hose component.Put the drain hose clamp on the outer drain hose,insert the outer drain hose into the joint for it, andthen clutch tightly with drain hose clamp.Hang the outer drain hose on the proper placebefore washing( do not use it toppled downon the ground).Attend that the outlet of drain hose shall be higherthan the water level in washtub to avoid siphonphenomenon.