13DELaY sTaRT bUTTon• Press this button to delay the start of your wash cycle between 1 - 24 hoursin one hour increments.• Use this button to select a delayed start of the washer. The number of hourswill be shown in the Estimated Time Remaining Display. Each press of theDelay Start Button will increase the time by 1 hour.• One button press after 24 will cancel the Delay Start feature. You can alsocancel the Delay Start feature by turning off power to the washer with thePOWER Button.• The START/PAUSE Button must be selected to begin the countdown.EsTIMaTED TIME REMaInInG DIsPLaY• The Estimated Time Remaining Display shows the estimated cycle time inminutes.• When the Delay Start option is being used, the Estimated Time RemainingDisplay will show the delay time in hours.sTaRT/PaUsE bUTTon• Press this button to start a selected cycle or to pause an operating cycle.noTE: After starting the wash cycle, you must pause the operating cycle tochange the Water Level setting.PoWER bUTTon• Press the POWER button to turn on the washer.noTE: If the washer is turned on, but START/PAUSE is not pressed, the powerwill automatically turn off after 5 minutes.