Haier HBF205E - 04-06 User Manual

Also see for BrewMaster HBF205E: User manual User manual

Haier HBF205E - 04-06 User Manual Manual pdf 9 page image

8EnglishInstalling the GuardrailFollow the steps below to install the guardrail onthe worktop.1. Place the guardrail on top of the cabinet.2. Align all holes of the guardrail with the holesof the cabinet.3. Secure the guardrail to the cabinet with eightsmall Phillips-Head screws.Installation InstructionsNote: Your CO 2 cylinder is shipped empty to avoid any possible accidentsduring transportation. When you purchase the first keg of beer, have yourCO 2 cylinder filled by your local compressed gas supplier. (See WeldingSupply in Yellow Pages)Tapping the Beer Keg (American Sankey Type Barrel)Your beer dispenser comes with “Lo-Boy Sankey Coupler American Type.”This brand name is the most widely used in the United States. Before purchasinga keg, check with your beer distributor to make sure that an American SankeyTap can be used. (Replacement and other taps are available atwww.draughttech.com)Remove and identify the following components from the partsbox:1. (1) CO2 Regulator – dual gauge – dual outlet2. (1) CO2 Tank – 5 pound - EMPTY3. (2) Keg couplers – low profile type (Lo-Boy Sankey Coupler AmericanType)4. (4) White plastic squeeze clamps5. (2) 4 foot long red hose6. (1) Cleaning kitBE SURE THAT BEFORE INSTALLATION YOU HAVE FILLED YOURTANK WITH GASWARNING!CO2 can be dangerous! CO2 cylinders contain high-pressured gas, which can behazardous if handled improperly. They must be handled with care.