PROPER lOCATION• To ensure that your beer dispenser works at the maximum efficiency it wasdesigned for, install it in a location where there is proper air circulation, plumb-ing and electrical connections.• Choose a location where the beer dispenser will be away from heat and willnot be exposed to direct sunlight.• This beer dispenser is designed for indoor use only and should not be usedoutdoors.• This beer dispenser is a freestanding design and should not be placed in abuilt-in or recessed area.• The following dimensions are the recommended clearances around the beerdispenser.Sides ....................... 3/4" (19mm)Back............................1" (25mm)6EnglishGrounding InstructionsThis appliance must be grounded. In the event of an electrical short circuit,grounding reduces the risk of electric shock by providing an escape wire for theelectric current. This appliance is equipped with a cord containing a groundingwire and a grounded plug. The plug must be inserted into an outlet that isproperly installed and grounded.• Improper use of the plug may result in the risk of electric shock.• Consult a qualified electrician or service technician if the groundinginstructions are not completely understood or if in doubt as to whetherthe appliance has been properly grounded.Wiring RequirementsThis appliance must be plugged into a 15Amp, 115 Volt, 60HzGROUNDED OUTLET.Note: Where a standard two-prong outlet is encountered, it is the personalresponsibility and obligation of the consumer to have it replaced with aproperly grounded three-prong outlet.Extension CordsWe do not recommend the use of an extension cord with this unit.Power InterruptionsOccasionally, there may be power interruptions due to thunderstorms or othercauses. Remove the power cord from wall outlet when a power outage occurs.When power has been restored, re-plug the power cord into wall outlet.ElECTRICAl CONNECTIONS