× ¢ Ò â Ê Â Ï î2Safety precautionsPlease insert the power cord intospecial receptacle with rated vol-tage.Be sure to use single-phasethree pins receptacle.The earthingterminal of the receptacle must beearthed reliably.If possible,pleaseadopt electric leakage protector.When the machine is normallyusing, please put the power plugat the location easily to be insert-ed and extracted by hand. Be sureto pull the plug off when there'spower failure, or the machine isbeing moved, cleaned or when itis idle.Do not put the machine at dampplace like the bathroom . Neverwash it with water. Do not placewet laundries on the control panel.Do not wash water-proof laundries likethe raincoat, bike covers etc. to avoidabnormal vibrations.Do not let the machine share one receptaclewith other electric appliances. If the powerplug is damaged, or the plugging into thereceptacle is loose, do not use the plug anymore.Ventilation hole atthe bottom of thewashing machineEarthIf the supply cord is damaged,it must be replacedby the manufacturer or its serviceagent or a similarly qualified personin order to avoid a hazard.Do not use water hotter than 50 C .For washing machine with ventilationopenings in the base, that a carpetmust not obstruct the openings.11Spinning1.Put the laundries into the spin tub evenly and smoothly.2.Press the gland in the tub properly. Close the inner andouter cover of the spin tub.3.SpinSelect suitable spin time according to the laundries, and do spinning.During spinning, if there is abnormal sound, it is generally owing toslanting placement of the laundries. Please stop the machine andreorder the laundries.In spinning, it will pause the work if you open the outer cover of thespin tub. Close it to resume the spinning.To do spinning and draining and rinsewith water-filling together, please firstdo spinning for around 1 minute, thendo draining or rinse with water-filling .Otherwise the spinning will stop owingto too much water stored in the spin tub.