Haier AWCE26ARS User Manual

Contents

Haier AWCE26ARS User Manual Manual pdf 10 page image

8EnglishWINE CELLAR INSTALLATIONSInstall Limitations• Do not install your wine cellar in any location not properly insulated or heated e.g. garage etc. Your winecellar was not designed to operate in temperature settings below 55˚ Fahrenheit.• Select a suitable location for the wine cellar on a hard even surface away from direct sunlight or heatsource e.g. radiators, baseboard heaters, cooking appliances etc. Any floor unevenness should be correct-ed with the leveling legs located on the front and rear bottom corners of the wine cellar.Door Handle Installation• Once you have unpacked your wine cellar you will have to install the grip handle on the door with thesupplied screws.Dimensions• Built-in wine coolers need to be ventilated from the front. This feature allows the unit to be built in anenclosed area. The bottom front grille should be clear of all obstructions. This is absolutely necessary forthe air to circulate and for the unit to operate efficiently. The dimensions for installation are as follows. (Wx D x H)Unit Dimensions: 14 7/8” x 23 1/8” x 34 1/4”Built-In Dimensions: 15” x 24” x 34 1/2”20-5/8”23-1/8”14-7/8”34-1/4”