EN - 112.3. Electrical Connection and SafetyWARNING: The electrical connectionof this appliance should be carried outby an authorised service person orqualified electrician, according to theinstructions in this guide and in compliancewith the current local regulations.WARNING: THE APPLIANCE MUSTBE EARTHED.• Before connecting the appliance to thepower supply, the voltage rating of theappliance (stamped on the applianceidentification plate) must be checked forcorrespondence to the available mainssupply voltage, and the mains electricwiring should be capable of handling theappliance’s power rating (also indicatedon the identification plate).• During installation, please ensurethat isolated cables are used. Anincorrect connection could damageyour appliance. If the mains cable isdamaged and needs to be replaced thisshould be done by a qualified person.• Do not use adaptors, multiple socketsand/or extension leads.• The supply cord should be kept awayfrom hot parts of the appliance and mustnot be bent or compressed. Otherwisethe cord may be damaged, causing ashort circuit.• If the appliance is not connected to themains with a plug, a multi-pole isolatorswitch (with at least 3 mm contactspacing) must be used in order to meetthe safety regulations.• The fused switch must be easilyaccessible once the appliance has beeninstalled.• Ensure all connections are adequatelytightened.• Fix the supply cable in the cable clampand then close the cover.• The terminal box connection is placedon the terminal box.•Brown Yellow+GreenBlue