Page 46Alarm to Relay Connections 51350-18 Alarms Relays Recorders.fmSection 46. A screen showing all of your selections will then appear. Select ATTACHRECORDER TO ANALOG OUTPUT and press ENTER to confirm thesetting or select CANCEL and press ENTER. The messageCONFIGURING NETWORK...PLEASE WAIT will appear.The OPERATION COMPLETE message will appear when the attachmentis complete.4.1.5 Detaching Recorder from Analog Output1. Press the MENU key to access the Main Menu.2. Select Network Menu and press ENTER.3. Select RECORDER TO ANALOG OUT and press ENTER.4. Select DETACH and press ENTER.• If two or more sensors are found on the network, the AquaTrendInterface will present a list of sensors from which to choose. Selectthe sensor from the list.• If two or more recorders are attached, a menu showingAttached Recorders will appear. Select the recorder of interestand press ENTER.• If two or more Signal Output Modules are available, a menu of SOMswill appear. Select the SOM of interest and press ENTER.5. A screen showing all of your selections will then appear. Select DETACHRECORDER FROM ANALOG OUTPUT and press ENTER to confirm thesetting or select CANCEL to exit without making changes. The messageCONFIGURING NETWORK...PLEASE WAIT will appear.The OPERATION COMPLETE message will appear when the detachmentis complete.
