HP T2200 XR User Manual

Contents

Operation2-6 HP Uninterruptible Power System T2200 XR Models User GuideAudible AlarmsThe UPS may sound an audible alarm to warn of a problem. For information on what to do ifthe UPS detects an alarm condition, refer to Chapter 5, “Troubleshooting.”Silencing an Audible AlarmTo silence an audible alarm, press the Test/Alarm Reset button (1).1Figure 2-5: Test/Alarm Reset buttonIMPORTANT:• Although an audible alarm silences, the condition that caused the alarm still exists. For informationon what to do if the UPS detects an alarm condition, refer to Chapter 5, “Troubleshooting.”• If a utility power failure caused the alarm (the Utility LED or the General Alarm LED illuminatesred), the alarm silences after utility power is restored.Shutting Down the SystemTo shut down the system:1. Shut down all load devices.2. Press the Standby button to take the UPS out of Operate mode.3. Disconnect the UPS from utility power.4. Wait at least 60 seconds while the UPS internal circuitry discharges.Artisan Technology Group - Quality Instrumentation ... Guaranteed | (888) 88-SOURCE | www.artisantg.com