HP Media Card Reader with PCI Card Installation Manual

Contents

HP Media Card Reader with PCI CardInstallation Guide www.hp.com 27Do not know how toremove a mediacard correctly.The computer’ssoftware is used tosafely eject the card.Open “My Computer,”right-click on thecorresponding drive icon, andselect “Eject.” Then pull thecard out of the slot.Note: Never remove the cardwhen the green LED isflashing.After installing themedia card readerand booting toWindows, thereader and theinserted cards arenot recognized bythe computer.The operating systemneeds time torecognize the device ifthe reader was justinstalled into thecomputer and you areturning the PC on forthe first time.Wait a few seconds so thatthe operating system canrecognize the reader and theavailable ports, and thenrecognize whatever media isinserted in the reader.After inserting amedia card in thereader, the computerattempts to bootfrom the media card.The inserted mediacard has bootcapability.If you do not want to bootfrom the media card, remove itduring boot or do not selectthe option to boot from theinserted media card duringthe boot process.Computer will notboot from a USBremovable drive ormedia that isinserted in the USBport on the mediacard reader.The media card readeris connected to thecomputer via the PCIcard, which is notsupported on the HPDesktopBIOS.The bootable USB device willhave boot support if youconnect the media cardreader to an available USBconnector on the computer’ssystem board. If no connectoris available, plug the bootabledevice into a different USBport on the computer.After installing themedia card reader,the front USB portson the computer donot work.The USB cable for thefront USB ports wasdisconnected so thatthe system boardconnector could beused for the reader.Reconnect the cable for thefront USB ports. Install the PCIcard and connect the mediareader to the USB connectoron the PCI card.Problem Cause Solution

/ 28

Related manuals for HP Media Card Reader with PCI Card