HP KZM-6120 Manual

KZM-6120 Mainboard Manual3 - 4Quick Power On Self TestWhen enabled, allows the BIOS to bypass the extensive memory test.The options are: Enabled (Default), Disabled.Boot From LAN FirstThis feature makes the system bootable by the remote server via LAN.The options are: Enabled (Default), Disabled.Boot SequenceAllows the system BIOS to first try to boot the operating system from theselected disk drive. The options are: A, C, SCSI (Default); C, A, SCSI; C,CDROM, A; CDROM, C, A; D, A, SCSI; E, A, SCSI; F, A, SCSI; SCSI, A, C;SCSI, C, A; C Only; LS/ZIP, C.Swap Floppy DriveAllows you to switch the order in which the operating system accessesthe floppy drives during boot up.The options are: Enabled, Disabled (Default).Boot Up Floppy SeekWhen enabled, assigns the BIOS to perform floppy diskette drive tests byissuing the time-consuming seek commands.The options are: Enabled (Default), Disabled.Boot Up Numlock StatusWhen set to On, allows the BIOS to automatically enable the Num LockFunction when the system boots up. The options are: On (Default), Off.Memory Parity CheckThis feature enables BIOS to perform automatic memory checking upondetection of ECC or parity DRAM.The options are: Enabled, Disabled (Default).When the feature set at Enabled, the system BIOS will allow other utilitiesto access the Intel Pentium III serial number while they need to do so.The settings are: Enabled (Default), Disabled.Processor Number Feature