HP Jetdirect 310x - Print Server For Fast Ethernet User Manual

Also see for 175X - JetDirect Print Server: Administrator's guide Appendix Administrator's guide White paper Product Update Note

Contents

BOOTP/DHCPServerDisplayed during initialization while the print server attempts to obtain itsTCP/IP configuration from a BOOTP or DHCP server. The temporary addressdisplayed is 0.0.0.0.Not Specified the configuration server’s IP address could not bedetermined or was set to zero in the response packet.lTFTPServerThe IP address of the system where the TFTP configuration file is located.During initialization, the temporary address 0.0.0.0 is displayed.Not Specified a TFTP server has not been not been set.lConfigFileThe name of the print server’s configuration file. The file pathname may betruncated to fit on rest of the one line allocated.Not Specified a file was not specified in the BOOTP reply fromthe host.lDomainNameThe Domain Name System (DNS) name of the domain in which the printserver resides (for example, support.company.com). It is not the fullyqualified DNS name because the host printer name is not included (forexample: printer1.support.company.com).Not Specified a domain name has not been configured on theprint server.lDNS Server The IP address of the Domain Name System (DNS) server.Not Specified a DNS server’s IP address has not beenconfigured on the print server.lWINSServerThe IP address of the Windows Internet Name Service (WINS) server.Not Specified a WINS server’s IP address has not beenconfigured on the print server.lSyslogServerThe IP address of the syslog server configured on the print server.Not Specified a syslog server has not been configured.lIdleTimeoutThe timeout value expressed in seconds after which the print server closes anidle TCP print data connection. Acceptable values are integers between 0 and3600 seconds. A value of zero turns off the timeout mechanism. The defaultvalue is 270 seconds.WebJetadminURLIf the print server is found on the network by HP Web Jetadmin, the URL ofthe host system used for HP Web Jetadmin services is displayed. The URL islimited to two lines and may be truncated.Not Specified the URL of the HP Web Jetadmin host systemcould not be identified or is not configured.lBack to TopIPX/SPX Protocol InformationProvides the current status and parameter values for the IPX/SPX network protocols.Message Description