1IBM OS/2 Warp Server for e-BusinessInstallation Guide for Hewlett-PackardNetServersNOTICE: The information in this document was last updated for the HP NetServer Navigator CD-ROM version L.17.01. If youdon't have the L.17.01 version CD-ROM and you're obtaining this document from the HP NetServer web site as a reference toinstall an operating system, be sure to also check the HP NetServer web site for the latest available drivers.©Copyright Hewlett-Packard CompanySeptember 7, 1999(This document is only available in English.)IntroductionThe objective of this document is to help Hewlett-Packard customers install IBM OS/2 WarpServer for e-business on a HP NetServer system. For additional information on Hewlett-PackardNetServers refer to the HP Information Assistant on the HP NetServer Navigator CD-ROM.It is critical to know which disk adapters or disk array adapter are in the system before you startthe installation. The tables in the Appendix will help you identify what adapter is implemented orembedded on the system board for each HP NetServer.NOTE: The IBM OS/2 Warp Server for e-business is not supported on the HP NetServerE series (E 30, E 40, E 45, E 50, and E 60).Table of ContentsInstallation Procedure: OS/2 Warp Server for e-businessRequirementsCreating the HP Drivers/Utilities DisketteInstallation StepsAPPENDIXInstallation Procedure: OS/2 Warp Server for e-businessRequirements• Driver's Diskette for OS/2 Warp Server for e-business created from the HP NetServerNavigator CD diskette library.• OS/2 Warp Server for e-business CD