HP C8000 - Workstation - 0 MB RAM Installation Instructions Manual

Contents

HP Mid-Weight Slide Kit(5069-6371)Installation InstructionsAbout this deviceThe HP Mid-Weight Slide Kit (5069-6371) enables you to install HP2U, 3U, 4U, and 5U servers into HP round-hole, square-hole,threaded-hole, and early HP racks.Kit contentsIf any of the following items are missing or damaged, contact yourHP authorized reseller. The following hardware pieces are includedin this kit.Quantity Description Picture1 Cable management arm (J1539-63003)2 Mid-weight inner slides (J1539-63001)2 Mid-weight outer slide assemblies (J1539-63002)2 Hook-and-loop straps (1400-2030)1 Mid-weight slide-mounting alignment tool(5185-6098)Hardware kit contentsQuantity Description Picture2 M5 x 30-mm screw (0515-2992)1 M5 x 10-mm screw (5021-2991)2 M5 x 16-mm screw (0515-3019)4 M4 x 8-mm screw (0515-2478)2 M5 barrel nut (5065-7210)1 Tie-down bracket (5069-6357)Optional hardware kit contents (J1539-63004)The optional hardware kit is required to install the mid-weight slidekit into early HP racks.Quantity Description Picture4 M5 x 16-mm screw (0515-3019)2 M6 flathead screw (5185-6036)2 Front bracket (5184-2312)© Copyright 2006, 2008 Hewlett-Packard Development Company, L.P.The information contained herein is subject to change without notice. Theonly warranties for HP products and services are set forth in the expresswarranty statements accompanying such products and services. Nothingherein should be construed as constituting an additional warranty. HP shallnot be liable for technical or editorial errors or omissions contained herein.Part Number 416755-003March 2008 (Third Edition)