HP 245161-B22 - 10642 42U Rack Shock Pallet Installation Instructions Manual

Also see for 245161-B22 - 10642 42U Rack Shock Pallet: Reference guide Installation instructions Best practices manual Installation instructions Read this first

Contents

kit contents

HP Hook-and-LoopCabling Strap Clip RackOption KitInstallation Instructions© Copyright 2004, 2006 Hewlett-Packard Development Company, L.P.The information contained herein is subject to change without notice. The onlywarranties for HP products and services are set forth in the express warrantystatements accompanying such products and services. Nothing herein shouldbe construed as constituting an additional warranty. HP shall not be liable fortechnical or editorial errors or omissions contained herein.April 2006 (Third Edition)Part Number 381177-003About this deviceThe HP Hook-and-Loop Cabling Strap Clip Rack Option Kitenables you to add hook-and-loop cabling strap clips tomanage your cable configurations.Kit contentsThe following items are required for installation:• Hook-and-loop cabling strap 12.7-cm (5 in) clip (20)•• Hook-and-loop cabling strap 30.5-cm (12 in) clip (10)This kit might contain extra hardware for your convenience.Rack warningWARNING: To reduce the risk of personalinjury or damage to the equipment,be sure that:• The leveling feet are extended to thefloor.• The full weight of the rack rests on theleveling feet.• The stabilizing feet are attached to therack if it is a single-rack installation.• The racks are coupled together inmultiple-rack installations.• Only one component is extended at atime. A rack may become unstable ifmore than one component is extendedfor any reason.Hook-and-loop cabling strap 20.3-cm (8 in) clip (20)

/ 2

Related manuals for HP 245161-B22 - 10642 42U Rack Shock Pallet