EL-MF877-00 Page 1Template Revision BProduct End-of-Life Disassembly InstructionsProduct Category: Networking EquipmentMarketing Name / Model[List multiple models if applicable.]HP A10504 Switch Chassis(JC613A)HP A10504 TAA Switch Chassis(JG820A)Purpose: The document is intended for use by end-of-life recyclers or treatment facilities. It provides the basic instructionsfor the disassembly of HP products to remove components and materials requiring selective treatment, as defined by EUdirective 2002/96/EC, Waste Electrical and Electronic Equipment (WEEE).1.0 Items Requiring Selective Treatment1.1 Items listed below are classified as requiring selective treatment.1.2 Enter the quantity of items contained within the product which require selective treatment in the right column, asapplicable.Item Description NotesQuantityof itemsincludedin productPrinted Circuit Boards (PCB) or Printed CircuitAssemblies (PCA)With a surface greater than 10 sq cm 6Batteries All types including standard alkaline and lithium coinor button style batteries0Mercury-containing components For example, mercury in lamps, display backlights,scanner lamps, switches, batteries0Liquid Crystal Displays (LCD) with a surface greaterthan 100 sq cmIncludes background illuminated displays with gasdischarge lamps0Cathode Ray Tubes (CRT) 0Capacitors / condensers (Containing PCB/PCT) 0Electrolytic Capacitors / Condensers measuringgreater than 2.5 cm in diameter or height0External electrical cables and cords 0Gas Discharge Lamps 0Plastics containing Brominated Flame Retardantsweighing > 25 grams (not including PCBs or PCAsalready listed as a separate item above)8Components and parts containing toner and ink,including liquids, semi-liquids (gel/paste) and tonerInclude the cartridges, print heads, tubes, ventchambers, and service stations.0Components and waste containing asbestos 0Components, parts and materials containingrefractory ceramic fibers0Components, parts and materials containingradioactive substances02.0 Tools RequiredList the type and size of the tools that would typically be used to disassemble the product to a point where componentsand materials requiring selective treatment can be removed.