HP 8712ET Quick Start Manual

Also see for HP 8712ES: User guide supplement Installation note User guide Quick start guide Quick start guide

-1-CATV Quick Start GuideHP 8712ET/ES and HP 8714ET/ESHP Part Number 08714-90021Printed in USA October 1998© Copyright 1998 Hewlett-Packard CompanyThis quick start guide provides basic instructions on how to make measurements that test the qualityof coaxial cables. Refer to the Option 100 Fault Location and Structural Return Loss MeasurementUser’s Guide Supplement for more detailed information. Also, please refer to your analyzer’s User’sGuide for safety, warranty, and assistance information.NOTE This quick start guide assumes the use of an HP 8712ET or HP 8714ET. If you are using an HP 8712ES orHP 8714ES, some key presses and displays will be slightly different.To Make a Fault Location Measurement1. Choose the measurement parameters or recall an instrument state.2. Calibrate the analyzer. 3. Connect the equipment.PRESET BEGIN Cable Fault LocationStart DistanceXX ENTER Stop DistanceXX ENTERCAL Full Band Cal

/ 4

Related manuals for HP HP 8712ES