Comprehensive Install InstructionsClusterPackComprehensive Install InstructionsIndex | Administrators Guide | Users Guide | Tool Overview | Related Documents | Dictionary1.2.1 Comprehensive Installation OverviewStep 1 Fill Out the ClusterPack Installation WorksheetStep 2 Install PrerequisitesStep 3 Allocate File System SpaceStep 4 Obtain a License FileStep 5 Prepare Hardware AccessStep 6 Power Up the Management ServerStep 7 Configure the ProCurve SwitchStep 8 Copy the License Files to the Management ServerStep 9 Install ClusterPack on the Management ServerStep 10 Run manager_config on the Management ServerStep 11 Run mp_register on the Management ServerStep 12 Power up the Compute NodesStep 13 Run compute_config on the Management ServerStep 14 Set up HyperFabric (optional)Step 15 Set up InfiniBand (optional)Step 16 Run finalize_config on the Management ServerStep 17 Create a Golden Image of a Compute Node from the Management ServerStep 18 Add nodes to the cluster that will receive the Golden ImageStep 19 Distribute the Golden Image to the remaining Compute NodesStep 20 Install and Configure the remaining Compute NodesStep 21 Verify the final cluster configuration1.2.1 Comprehensive Installation OverviewClusterPack uses a two-stage process for setting up an HP-UX Cluster:z Create a base configuration with a Management Server and one Compute Node{ Prepare for installation.{ Install and configure the Management Server.{ Install and configure the initial Compute Node and its Management
