H3C MPU-LSXM1SUPXD3 Manual

H3C MPU-LSXM1SUPXD3 Manual Manual pdf 1 page image

Manual version: APW100-20190430 BOM: 3123A1TKiMPU—LSXM1SUPXD31 Card identifierThe mark LSXM1SUPXD3 is printed at the upper right corner of the front panel to identify the card.2 SpecificationsTable 1 Card specificationsItem SpecificationFlash 2 GBBootROM 8 MBNVRAM 1 MBSDRAM (DDR3) 8 GBCard size (H × W × D) 40 × 399 × 355 mm (1.57 × 15.71 × 13.98 in)Power consumption 32W to 47WInterfaces• 1 console port• 1 USB console port• 4 network management ports: 2 RJ-45 ports and 2 SFP fiber ports• 1 primary USB portTransmission rate• Console port: 9600 bps to 115200 bps (default: 9600 bps)• USB console port: ≤ 115200 bps (default: 9600 bps)• network management ports (RJ-45): 10/100/1000 Mbps, half/fullduplex• network management ports (SFP): 1000 MbpsTransmission medium and maxtransmission distance• Console port: 15 m (49.21 ft) over asynchronous EIA/TIA-232cables• USB console port: 10 m (32.81 ft) over USB-AB cables• network management ports (RJ-45): 100 m (328.08 ft) overCategory 5 or higher twisted pair cables• network management ports (SFP): GE SFP fiber modulespecificationsCompatible device models S12508-XSSoftware version Release 7585P03 and laterNOTE:H3C recommends not using a USB extender cable to connect the USB port.The 10/100/1000BASE-T copper port uses an RJ-45 connector.

/ 2

Related manuals for H3C MPU-LSXM1SUPXD3