H3C LSQM1SDNB0 Manual

H3C LSQM1SDNB0 Manual Manual pdf 1 page image

Manual version: APW102-20191215 BOM: 3123A1VFiH3C LSQM1SDNB0 SDN automation module1 IdentifierThe module identifier LSQM1SDNB0 is in the upper right corner of the front panel.2 About the moduleThe LSQM1SDNB0 is an SDN automation module built with server components required forADCampus solutions. Plug and play, it supports fully automated deployment at small andmedium-sized campus networks. It can deliver controller, authentication, and address assignmentfunctions, eliminating the need for installing physical servers.Figure 1 LSQM1SDNB0 front panel(1) USB ports (3 in total) (2) VGA connector(3) Management Ethernet port (4) Management Ethernet port LED (LINK/ACT)(5) Console port (CONSOLE) (6) Shutdown LED and button (SHUTDOWN)(7) Ejector lever (8) Captive screw3 SpecificationsTable 1 Module specificationsItem SpecificationsHard disk 480GB SSDMemory Two memory slotsStandard configuration: 64 GB (two 32GB memory bars)Dimensions (H × W × D) 40 × 399 × 355 mm (1.57 × 15.71 × 13.98 in)Weight 3.40 kg (7.50 lb)Power consumption 102 to 124 WHot swapping Not supportedPorts• 3 × USB2.0 ports (used by technical support for debugging only)• 1 × VGA connector• 1 × 10/100/1000BASE-T management Ethernet port• 1 × console port (used by technical support for debugging only)Ambient temperature • Operating: 0°C to 45°C (32°F to 113°F)• Storage: –40°C to +70°C (–40°F to +158°F)

/ 4

Related manuals for H3C LSQM1SDNB0