Gateway ALR 8200 Maintaining And Troubleshooting

Also see for ALR 8200: User guide

Contents

Gateway ALR 8200 Maintaining And Troubleshooting Manual pdf 29 page image

Components 17CPU setting jumperThis jumper allows you to set the speed of the processor. Both processors,in dual processor configurations, must have the same speed rating. Ifprocessors of different speeds are used in the same system, the processorsmust run at the speed of the slower processor.BatteryProvides the power to maintain the CMOS memory when the system isturned off or unplugged.Expansion slotsThe system features eight expansion slots: five PCI slots, one ISA slot, onePCI/RAIDport, and one shared PCI/ISA slot.The PCI bus processes peripheral transactions at a system clock speed of upto 33 MHz.I/O connectorsThe I/O connectors are located on the back panel of the system. Figure 8shows the connectors and the table below provides a key to the figure.Caution!There is a danger ofexplosion if the battery isincorrectly replaced.Replace the battery onlywith the same or equivalenttype recommended by themanufacturer. Dispose ofused batteries according tothe manufacturer’sinstructions.