Get Started10 nüvifone M10E Owner’s ManualReplace the Battery CoverSlide the battery cover onto the back ofthe device until it clicks.Charge the BatteryNoticeYour nüvifone will not charge if ithas exceeded the maximum chargingtemperature of 122°F (50°C). If thenüvifone is mounted in the windshield,remove it from the mount and place itsomewhere out of direct sunlight.Charge the battery for at least fourhours before using the nüvifone for thefirst time.1. Insert the plug into the AC poweradapter, if necessary.2. Plug the USB cable into the ACadapter.3. Connect the micro-USB end of theUSB cable to the connector on theside of the device.4. Plug the AC adapter into a poweroutlet.If you completely discharge the battery,recharge it for at least 20 minutesbefore turning on your nüvifone.Alternate Charging Methods(Preferred and fastest method)Insert your nüvifone into the cradle,and connect the vehicle powercable to the cradle.Connect the vehicle power cable toyour nüvifone.Connect your nüvifone to acomputer using the USB cableincluded in the box.Insert the battery into the batterycharger (accessory). For moreinformation about accessories, go towww.garminasus.com.••••
