Appendixnüvifone M10E Owner’s Manual 10Mount on Your DashboardA mounting disk is included in somenüvifone packages. Use the mountingdisk to mount your device to thedashboard and to comply with certainstate and local regulations. Nevermount the device in a location thatobstructs the driver’s view of the road.NoticeThe permanent mounting adhesive isextremely difficult to remove after it isinstalled.1. Clean and dry the dashboard whereyou are placing the disk.2. Remove the backing from theadhesive on the bottom of the disk.3. Place the disk on the dashboard.4. Remove the clear plastic cover fromthe top of the disk.5. Place the suction cup mount ontop of the disk. Flip the lever down(toward the disk).Remove the nüvifone,Cradle, and MountRemove the nüvifone from theCradle1. Press up on the tab on the top ofthe cradle.2. Tilt the nüvifone forward.Remove the Cradle from theMount1. Turn the cradle to the right or left.2. Apply pressure until the socket onthe cradle releases the ball on themount.Remove the Suction CupMount from the Windshield1. Flip the lever on the suction cupmount toward you.2. Pull the tab on the suction cuptoward you.
