Garmin Zumo 395 Owner's Manual

Also see for Zumo 395: Quick start manual Installation instructions

Garmin Zumo 395 Owner's Manual Manual pdf 21 page image

Position Reporting: Shares your position information withGarmin to improve content.Travel History: Allows the device to record information for themyTrends, Where I’ve Been, and Trip Log features.Clear Travel History: Clears your travel history for themyTrends, Where I’ve Been, and Trip Log features.Restoring SettingsYou can restore a category of settings or all settings to thefactory default values.1 Select Settings.2 If necessary, select a settings category.3 Select > Restore.Device InformationSpecificationsWater resistance IEC 60529 IPX7Operating temperaturerangeFrom -20° to 55°C (from -4° to 131°F)Charging temperaturerangeFrom 0° to 45°C (from 32° to 113°F)Power input (CLA,motorcycle, or externalpower)From 12 to 24 VdcBattery life Up to 4 hr., depending on usage andsettingsBattery type Lithium-ion batteryBattery voltage range From 3.5 to 4.1 VRadio frequency protocol 2.4 GHz ANT+®wireless communicationsprotocol2.4 GHz Bluetooth wireless technology*The device withstands incidental exposure to water of up to 1 mfor up to 30 min. For more information, go to www.garmin.com/waterrating.Charging the DeviceNOTE: This Class III product shall be powered by an LPS powersupply.You can charge the battery in the device using any of thesemethods.• Install the device in the mount, and connect the mount tovehicle power.NOTICEDo not connect the device directly to the vehicle power cable.• Connect the device to a computer using a USB cable.The device may charge slowly when connected to acomputer. Some portable computers may not charge thedevice.• Connect the device to an optional power adapter accessory,such as a wall power adapter.You can purchase an approved Garmin AC-DC adaptersuitable for home or office use from a Garmin dealer orwww.garmin.com.Device MaintenanceDevice CareNOTICEAvoid dropping your device.Do not store the device where prolonged exposure to extremetemperatures can occur, because it can cause permanentdamage.Never use a hard or sharp object to operate the touchscreen, ordamage may result.Cleaning the Outer CasingNOTICEAvoid chemical cleaners and solvents that can damage plasticcomponents.1 Clean the outer casing of the device (not the touchscreen)using a cloth dampened with a mild detergent solution.2 Wipe the device dry.Cleaning the Touchscreen1 Use a soft, clean, lint-free cloth.2 If necessary, lightly dampen the cloth with water.3 If using a dampened cloth, turn off the device and disconnectthe device from power.4 Gently wipe the screen with the cloth.Avoiding Theft• Remove the device and mount from sight when not in use.• Remove the residue left on the windshield by the suction cup.• Do not keep your unit in the glove compartment.• Register your device at http://my.garmin.com.Resetting the DeviceYou can reset your device if it stops functioning.Hold the power key for 12 seconds.Removing the Device, Mount, and SuctionCupRemoving the Device from the Mount1 Press the release tab or button on the mount.2 Tilt the device forward.Removing the Mount from the Suction Cup1 Turn the device mount to the right or left.2 Apply pressure until the socket on the mount releases theball on the suction cup.Removing the Suction Cup from the Windshield1 Flip the lever on the suction cup toward you.2 Pull the tab on the suction cup toward you.Changing the Fuse in the Vehicle PowerCableNOTICEWhen replacing the fuse, do not lose any of the small piecesand make sure they are put back in the proper position. Thevehicle power cable does not work unless it is assembledcorrectly.If your device does not charge in your vehicle, you may need toreplace the fuse located at the tip of the vehicle adapter.1 Rotate the end piece À counter clockwise to unlock it.TIP: You may need to use a coin to remove the end piece.Device Information 17