Garmin StreetPilot 2610 Operating Instructions Manual

Also see for STREETPILOT 2610: Owner's manual Features Features

Garmin StreetPilot 2610 Operating Instructions Manual Manual pdf 55 page image

Reference43Check the box for the MapSource data that you wantdisplayed on the map.The System Information pageMap Info PageThe Map Info page displays version and map name(s) for any MapSource CD-ROM data stored on aninstalled CF data card. A box appears to the immediate left of each map name (directly under ‘Enabled’).When the box is checked, the designated map data appears on the map — at the appropriate map scalesand when within the boundaries of that map area.To turn individual MapSource maps on or off:1. MapSource data must first be uploaded to a CF data card and installed in your StreetPilot 2610/2650.2. Select the ‘MapSource Info’ option from the Info menu, then scroll through the list of available maps.3. If a check mark appears in the box to the left of a map name, that map is turned on and appears on themap display (maps that are disabled cannot be used for routing). If necessary, select the name of anylisted map to add or remove the check mark.4. You may also press the unit or remote MENU key and select options to ‘Enable All Maps’ or ‘Disable AllMaps’.For more information on MapSource and CF data cards, see page 53.System InfoPageThe System Info window shows the unit software version and unit ID number.Map Info Page