Oregon Series Owner’s Manual AppendixNoticeDo not try to navigate using Demomode because the GPS receiveris turned off. Any satellite signal-strength bars shown are onlysimulations and do not represent thestrength of actual satellite signals.To turn Demo Mode on, touch Setup> System > GPS > Demo Mode.Connecting Your Oregonto a ComputerYou can connect the Oregon to yourcomputer using the supplied USBcable.To connect your Oregon to yourcomputer:1. Lift the weather cap on the bottomof the Oregon.2. Insert the smaller connector onthe USB cable into the mini USBconnector.3. Connect the other end of thecable to a USB port on yourcomputer.Installing a microSDCardThe Oregon microSD card tray islocated beneath the AA batteries.Purchase microSD cards from anelectronics supplier or purchasepreloaded MapSource® detailed mapdata cards from your Garmin dealer.Go to http://buy.garmin.com forcompatible map products.To install or remove a microSDcard:1. Lift the latch on the back of theOregon (page 2), and remove thebattery cover and the batteries.2. Lift the metal cover.3. Push the card into the microSDcard tray, and close the metalcover.