Garmin GPSMAP 495 Quick Reference Manual

Also see for GPSMAP 495: Quick reference guide Owner's manual

Garmin GPSMAP 495 Quick Reference Manual Manual pdf 1 page image

GPSMAP® 495 Quick Reference GuideBacklit keypad for easynighttime operationAntennaExternal powerconnector underweather capUSBconnectorunderweather capSlot for optionaldata cardBattery pack. Press tab downto remove battery pack forreplacement, if necessary.256-Color TFT displaywith backlightingAntenna collapsesfor storage. Besure the antennais up (as shown)to receive satellitesignals.GPSMAP 495 KeysIN/OUT—press to zoom in or zoom out on the Map Page.PAGE/MODE—press to cycle through the main pages in sequenceand remove a submenu from the display. Press and hold to switchbetween Aviation Mode, Marine Mode, and Automotive Mode.QUIT—press to cycle through the main pages in reverse sequence,revert to the previous value in a data entry field, or cancel a function.ENTER/MARK—press to select a highlighted option, initiate anentry, and then confirm. Press and hold to mark a waypoint.MENU—press to view the Options Menu for the current page. Presstwice to open the Main Menu.DIRECT TO—press to start a Go To using airports, navaids,recently used waypoints, or user-created waypoints. Press and holdto open additional information for the current destination (such ascommunication frequency and runway data). While in AutomotiveMode, press and hold for more than one second to open the Next TurnPage and announce the next turn.NRST/FIND—press to show the nearest airports, navaids, points ofcommunication, and airspace boundaries in Aviation Mode. Whenpressed multiple times in Aviation Mode, the Find Menu appears.POWER—press and hold to turn the unit on or off. Press and releaseto adjust the backlighting and external speaker volume.ROCKER—press up, down, left, or right to select menu options, enterdata, or move the pointer on the Map Page.Using the Direct To KeyPress the DIRECT TO D key in Aviation Mode to display the Go To Page.Then select an airport, navaid, recent point, or user-defined point.In Automotive or Marine Mode, press the DIRECT TO D key to open theNavigation window.To Go To an airport or navaid:1. Press the DIRECT TO D key to open the Go To Page. Use theROCKER to select the Aviation tab.AirportidentifierFacilitynameCityGo To Page—Aviation tab2. Select the identifier, facility name, or city field, and press ENTER.3. Enter the identifier, facility name, or city.4. Press ENTER when the waypoint is shown and highlighted.5. With the on-screen Go To button highlighted, press ENTER. A courseis plotted from your present location to the selected destination.To Go To recently used waypoint or user-created waypoint:1. Press the DIRECT TO D key to open the Go To Page.2. Select the Recent or User tab.3. Highlight a waypoint from the list, and press ENTER.4. With the on-screen Go To button highlighted, press ENTER. A courseis plotted from your present location to the selected destination.Using the NRST/Find KeyPress the NRST/FIND key in Aviation Mode to show the Nearest Pages.Then select an airport, navaid, recent point, or user-defined point.In Automotive or Marine Mode, press the NRST/FIND key to open the FindMenu.To select an item as your destination from the Nearest Pages:1. Press the NRST/FIND key.2. To select a different category, use the ROCKER to select the tabalong the top of the page.Nearest Page: Airport tab3. Use the ROCKER to highlight a waypoint on the list, and pressENTER. The corresponding waypoint information page appears.For airports, use the ROCKER to select the tabs across the top of theinformation pages and show the airport data.4. Highlight Go To, and press ENTER to navigate to the point. PressQUIT to return to the Nearest Pages. You can also highlight anyof the on-screen buttons to perform that action, such as Delete orShow Map.© Copyright 2008 Garmin Ltd. or its subsidiaries190-00925-00 Rev. A Printed in Taiwan

/ 2

Related manuals for Garmin GPSMAP 495