Garmin GPS 35 LP Technical Specification

Also see for GPS 35 LP: Declaration of conformity Quick start guide Technical specification

Contents

Garmin GPS 35 LP Technical Specification Manual pdf 10 page image

SECTION 2OPERATIONAL CHARACTERISTICSThis section describes the basic operational characteristicsof the GPS 35/36. Additional information regarding inputand output specifications are contained in Section 4.2.1 SELF TESTAfter input power has been applied to the GPS 35/36 andperiodically thereafter, the unit will perform critical self testfunctions and report the results over the output channel(s).The following tests will be performed:1) RAM check2) ROM test3) Receiver test4) Real-time clock test5) Oscillator checkIn addition to the results of the above tests, the GPS 35/36will report software version information.2.2 INITIALIZATIONAfter the initial self test is complete, the GPS 35/36 will beginthe process of satellite acquisition and tracking. Theacquisition process is fully automatic and, under normalcircumstances, will take approximately 45 seconds toachieve a position fix (15 seconds if ephemeris data isknown). After a position fix has been calculated, validposition, velocity and time information will be transmittedover the output channel(s).5