Garmin GPS 12XL Owner's Manual & Reference

Also see for GPS 12XL - Hiking Receiver: Supplementary guide Specifications Owner's manual & reference

Garmin GPS 12XL Owner's Manual & Reference Manual pdf 24 page image

Waypoint Definition PageThe waypoint definition page lets you create newwaypoints manually or review and edit an existing way-point’s coordinates, symbols, and comments. It is alsoused to delete an individual waypoint from memory(see pg. 22). To create a new waypoint manually, you’llneed to know its position coordinates or its approxi-mate distance and bearing from an existing waypoint.To create a waypoint by entering coordinates:1. From the waypoint definition page, highlight ‘NEW?’,and press .2. Enter a waypoint name, and press .3. Press to select a waypoint symbol, make yourselection, and press .4. Highlight the ‘DONE?’ prompt, and press toreturn to the waypoint page.5. Highlight the position field, enter your position usingthe arrow keys, and press .6. Press to confirm the ‘DONE?’ prompt.Reference WaypointsTo create a new waypoint manually without know-ing its position coordinates, you’ll need to enter itsbearing and distance from an existing waypoint or yourpresent position.To create a new waypoint by referencing a storedwaypoint:1. From the waypoint definition page, highlight ‘NEW?’,and press .2. Enter a waypoint name, and press .WaypointDefinition &ReferenceWaypointsREFERENCE20The GPS 12XL’s advancedwaypoint planning fea-tures allow you to createnew waypoints and prac-tice navigation withoutever setting foot outside.If you create a new way-point by entering coordi-nates from a map, youmay want to re-mark thewaypoint’s exact positiononce you get there.To re-define an existingwaypoint’s position coor-dinates from the waypointdefinition page, simplyhighlight the DST fieldand press ENTER. Use theLEFT arrow key to set thedistance to 0.00, and pressENTER to confirm.The old coordinates will bereplaced by the coordi-nates of your present posi-tion (you must have avalid 2D or 3D positionfix and the reference way-point name field must beblank).WaypointNameReferenceWaypoint(leave blank forpresent position)Distance fromReferenceWaypointPositionCoordinatesBearing fromReferenceWaypointFunction PromptsWaypoint Comment